ExactFit™ 1 Blood Pressure Monitor

ExactFit 1 Blood Pressure Monitor Owner’s Manual

Question: How do I use my blood pressure monitor

Answer:

Sit down, relax and stay as still as possible. Remove your watch and jewelry. Do not cross your legs and keep your feet flat on the ground.

1. Place the cuff on your left arm in direct contact with your skin. Cuff must be 0.8″-1.2″ (2-3 cm) above your elbow.
2. Make sure the tube is facing in the same direction as your hand and is running over the top of your arm.
3. Make sure the tube is not pinched. The cuff should feel tight but comfortable.
4. Turn the device on. Touch the [heart] icon to start.
5. Push button to take a reading.
6. The cuff will start to gently inflate. Keep still and do not speak while the reading is being taken.
7. After the air pressure has increased, the pulse is detected, the heart rate symbol will start flashing.
8. LCD Display will show the results and AHA indicator arrow after measurement. After using the device, turn it off by pressing the start button or automatically after 1 minute.

Question: How do I make sure I get an accurate reading?

Answer:

In order to get an accurate measurement, it is important to follow these rules:

• Always take readings at the same time of day, under the same conditions. Always measure on the same arm. The left arm is recommended.
• Do not take a measurement within 30 minutes of smoking, drinking coffee or tea or any form of exertion. These factors will influence the measurement.
• Ensure at least 5 minutes of quiet rest before measurements. If possible, it is recommended to rest 10 minutes before taking the measurement. Try to always use the same resting time before taking a measurement.
• If you want to take multiple measurements, wait approximately 3 minutes before repeating a measurement.

For additional FAQ or post-purchase support, please visit our support page.